Average salary: $66,500 /yearly
More stats$111 per hour
Competent and experienced installer to prepare and install ceramic tiles and vinyl planks and lay carpet. Must have good communication skills, good physical fitness and currrent drivers license. 5-10 years plus flooring experience. Salary $100,000 depending on experience.
Suggested
Permanent employment
Doug Buckeys Carpet Court
Nedlands 6009, WA
13 days ago
...An established construction company is looking for an experienced foreman to initially focus on the finishing aspects of a residential project located in Northwest Sydney.
Your new role
On-site management of all trades & labourers, ensuring all regulations and specifications...
Suggested
Hourly pay
Contract work
Temporary work
For contractors
Immediate start
$70,000 - $85,000
...currently looking to recruit an experienced and qualified Floor Finisher to join their team in Horsham, VIC 3400.
The successful candidate... ...space
Adjust installation method (tack strips, adhesive or metal treads) according to the environment and the traffic in the room...
Suggested
Full time
Flexible hours
...Concrete finishers wanted - Full time position! Commitment and reliability is a must!
Your new company
Our client is a family-owned company specialising in manufacturing and supplying precast concrete products for domestic, rural and construction Industries in...
Suggested
Permanent employment
Full time
Temporary work
$70,000 - $75,000
...mostly
· Marks off and fabricates structural steel and other metal stock to make or repair metal products and structures such as... ...examining welds for width of bead, penetration and precision
· finishing products by cleaning, polishing, filing and bathing in acidic...
Suggested
Full time
Flexible hours
...experience significant growth, as such requires the services of Metal Machinist's for immediate start. This is an outstanding opportunity... ...continuous and efficient feed of metal wire strand and output of finished metal products
• Determine and Programme each individual...
Suggested
Full time
Immediate start
Flexible hours
$31.9 per hour
...are located in Sunshine West ,Victoria is looking for a fulltime Metal Polisher to join our busy team manufacturing Bullbars/Bumpers.... ...or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools
· Completes polishing checklists...
Suggested
Hourly pay
Full time
Day shift
$70,000
...through project life. Pacific Energy Group is based
in Rockhampton, QLD.
Pacific Energy Group Australia seeks experienced
FLOOR FINISHERS to join our workshop, yard and field team on a full time and
permanent basis.
The
role includes but is not limited to:
Measuring...
Suggested
Permanent employment
Full time
Contract work
Remote job
Flexible hours
$33 - $34 per hour
...offer are day shifts. Permanent opportunities are available if that is your goal. Located in Port Melbourne!
The role of a finishing operator is to
Inspecting banners for colour accuracy, alignment, and overall quality
Using equipment for trimming, hemming, and...
Suggested
Permanent employment
Full time
Contract work
Casual work
Day shift
$70,000 - $99,000
...Boilermaker/Metal Fabricator
Location:
Western Australia
Full time role
Annual Pay:
AUD $70,000 - $99,000.
Minotaur
is a... ...examining welds for width of bead,
penetration, and precision
finishing products by cleaning,
polishing, filing, and bathing in acidic...
Suggested
Full time
Free visa
Sunday
Day shift
Saturday
Afternoon shift
$70,000 - $85,000
...Hargreaves Joinery are currently looking to recruit an experienced and qualified Furniture Finisher to join their team in Yarrawonga, VIC 3730.
The successful candidate will need to undertake and possess:
Meeting with the customer to discuss finishing and color requirements...
Suggested
Full time
Work at office
Flexible hours
...prominent developer builders in Brisbane at the moment and throughout QLD. Due an ever increasing pipeline they are currently seeking Finishes Foreman to work on a a luxury multistory appartment project in Brisbane.
The Role
To be successful in this role you will have...
Suggested
Temporary work
For subcontractor
$70,000 - $85,000
...currently looking to recruit an experienced
and qualified Welder / Metal Fabricator to join their team in Deniliquin.
The successful... ...by lining up and joining them by
welding, bolting or riveting
Finish products by cleaning, polishing, filing or bathing them in
acid...
Suggested
Full time
Flexible hours
$70,000 - $80,000
...Our client, Walpett Engineering Pty Ltd is a long-term family company in the structural steel, metalwork and metal finishing industry. Customer satisfaction, product quality, and staff safety are the leading priorities of Walpett Engineering, as they constantly seek to improve...
Suggested
Full time
Flexible hours
$70,000
...in
perfect condition, so you can focus on building and completing your project
without delay.
We are seeking highly skilled Floor Finishers to
join our team on a full time and permanent basis
The role includes
but is not limited to:
Reading plans and
instructions...
Suggested
Permanent employment
Full time
Flexible hours
$70,000 - $73,000
...Services (NSW) Pty Ltd, is looking for a highly experienced Sheet Metal Worker with experience in door manufacturing.
Candidate must... ...forming experience essential.
High attention to detail and finish.
Skills and knowledge will determine hourly rate.
Summary of...
Hourly pay
Full time
Free visa
Day shift
$70,000 - $85,000
...truck trailers are currently recruiting for multiple Welders and Metal Fabricators to join their manufacturing department in Crows Nest... ...torch
Assist to remove all soft metal for welding
Evaluate finished products and perform quality checks on products
Assemble old units...
Full time
Flexible hours
$70,000 - $85,000
...gas, many of which have varying acceptance criteria for surface finish, code requirements and operating conditions that require careful... ...currently recruiting for several qualified and experienced Welders/Metal Fabricators to join our base at Shepparton VIC.
The successful...
Full time
Flexible hours
$70,000 - $85,000
...are currently recruiting for experienced and qualified Welder / Metal Fabricator. These positions are located at our sites in Moorebank... ...by lining up and
joining them by welding, bolting or riveting
Finish products by cleaning, polishing, filing
or bathing them in acid...
Full time
Flexible hours
...Superior Air Conditioning & Sheet Metal Works Pty Ltd job sites are located at various construction sites throughout the city of Sydney... ...strength of each join during and after project completion.
Finishing products by cleaning, polishing, filing and bathing in acidic solutions...
Full time
Free visa
Sunday
Day shift
Saturday
$60,000 - $80,000
...AUS Fabrication
Group are expert in steel manufacturing and metal fabrication. Our
organization provides specialized services to... ...components
Drilling and making holes need to the drawing.
Finishing products by polishing, filing, sanding and cleaning assembled products...
Full time
Sunday
Day shift
Saturday
...Sign Finisher / Installer
We are looking for someone that can apply stickers with very high attention to detail.
- Work as part of a team or independently
- Be open to learning new techniques
- Car wrap experience would be desirable
Our buisness works on all aspects...
Hourly pay
Temporary work
Casual work
Flexible hours
$70,000 - $85,000
...is currently recruiting for an experienced and qualified Welder / Metal Fabricator to join their team in Midvale WA 6056.
The... ...Welding, screwing, riveting and bolting components together to form finished products
Cutting, shaping and grinding sheet metal and plastic...
Full time
Flexible hours
$40 - $50 per hour
...industry across Sydney. Our clients specialise in high-quality sheet metal fabrication solutions for a diverse range of projects including... ..., and rollers to cut, bend, and shape sheet metal.
Inspect finished products to ensure they meet quality standards and project specifications...
Temporary work
...Metal Polishers Needed for Our Client in Australia Our client is currently on the lookout for skilled and experienced Metal Polishers... ...expertise in polishing a variety of metals to achieve high-quality finishes, demonstrating meticulous attention to detail, proficiency in using...
Permanent employment
Are you an experienced and qualified trades person with a proven track record in programming, setting and operating CNC Lathes, Mills, Cylindrical Grinding or Gear Cutting Machines?
Ronson Gears, established 70 years, is a highly innovative and Advanced Australian Manufacturer...
Full time
Sunday
Saturday
Afternoon shift
...# Measure & Laying underlay
# Applying adhesive
Installation
# Installing timber flooring
# Installing trims
Finishing & Covering
# Site clean-up and waste disposal
# Installation only of floor protection including
Post-Works
# Get Sign-off...
Full time
Free visa
Flexible hours
$70,000 - $85,000
...role, you would need to have experience fabricating components from technical drawings including cutting, jigging, MIG welding, and finishing. Experience in manufacturing high quality consumer products in a workshop factory environment and trade qualified is desirable. However...
Full time
Apprenticeship
Immediate start
Relocation
Flexible hours
$65,000 - $75,000
...grow, Victorian Trailers Pty Ltd requires a number of experienced metal fabricators / welders for Monday to Friday role (minimum 38 hours... ...of material as required ensuring that the highest standards in finish and tolerances, in accordance with information supplied, are achieved...
Full time
Immediate start
Free visa
Shift work
Sunday
Day shift
Saturday
Working Monday to Friday
...Modify and shape metal products by bolting, welding, and riveting them. Use a variety of metal working tools to cut and manipulate metal into designed structures. The fabricator must have knowledge in working with several types of metals. Proficiency in the use of different...
Full time
Sunday
Day shift
Saturday